To Next Page

To Previous Page

31.6

•

Remove fasteners (1) for fixed tubes on left and

right from fork cross brace, while holding Allen

bolt (arrow) on fixed tube to prevent it from turn-

ing

Attention:

The fasteners are secured with thread-locking com-

pound; heat to max. 120 °C (248 °F) to facilitate re-

moval!

•

Using angled 21 mm box-end spanner and Allen

socket,

BMW No. 31 5 603

, detach leading link

(arrow) from fork cross brace

•

Pull the telescopic forks down to remove

31 42 202

Removing and installing fixed

tube

•

Pull the fixed tube out of the telescoping tube

Note:

Note that telescopic fork oil can escape!

•

Drain off the telescopic fork oil

When installing:

•

While installation is basically a reversal of the re-

moval process, careful attention should be di-

rected toward the following:

Attention:

Take care not to damage the seals on the telescop-

ing tubes!

Fluids and lubricants:

BMW Telescopic fork oil........0.32 l/telescopic tube

............................. (0.56 Imp pints/telescopic tube)

C1310030

31 5 603

C1310040

Questions and Answers:

Need help?

Do you have a question about the BMW C1 200 and is the answer not in the manual?

BMW C1 200 Specifications

General