00.53
Check belt
•
Check for cracks
•
Check width of belt
Wear data:
Belt width .................................... 17.8 mm/0.701 in
•
Use retainer,
BMW No. 11 7 521,
to apply coun-
terpressure and remove the attachment from the
driven variator
•
Press variator plates together and turn them an-
ticlockwise
•
Remove belt together with driven variator
•
Clean housing and variator cover
When installing:
The legend on the belt must be visible from the out-
side
•
Make sure the belt is correctly seated
•
Install belt together with driven variator
•
Check by turning variator manually to ensure that
belt is not trapped
X
Torque specification:
Driven variator mount ................................... 60 Nm
11 7 521
C1000261
C1000270
To Next Page
Loading...
Need help?
General
