21.6
•
Clamp assembly stamp,
BMW No. 11 7 642,
into vise
•
Locate variator on pins of special assembly tool
d
Warning:
Make sure that hooks are correctly seated - injury
hazard!
•
Allow the hooks on the holder,
BMW No. 11 7 641,
to snap into place on the
lower pulley
•
Use narrow socket,
BMW No. 11 7 643,
to loos-
en the nut
•
Carefully release and remove retainer
•
Remove clutch and spring
Check spring
– Remove clutch
•
Check length "x" of spring
Wear data:
Length "x" of extended spring ............ min. 170 mm
.......................................................(min. 6.6929 in)
11 7 642
C1110550
11 7 641
C1110560
11 7 643
C1110570
C1210010
x
To Next Page
Loading...
Need help?
General
