00.54
Checking clutch lining
(Inspection III)
•
Remove bell housing; use puller if necessary
•
Check clutch plate lining replace if necessary
L
Note:
Replacing driven variator without clutch (
a
24.6).
a
................................................... See Group 21
Wear data:
Pad, wide H...............................4.0 mm/0.15748 in
Pad, narrow h............................2.5 mm/0.09842 in
Clean variator filter screen
(Inspections II and III)
•
Remove fasteners (1)
•
Remove vent cover
•
Remove filter screen from retaining lugs and
clean
•
Clean inside of vent cap
C1110540
H
h
C1000240
1
C1000280
To Next Page
Loading...
Need help?
General
