BMW C1 200 User Manual

36.9
36 30 320
Removing and installing rear
wheel
Removing rear wheel
e
Attention:
Avoid scratching the wheel rim; if necessary mask
off the brake caliper.
Do not tilt the brake caliper!
L
Note:
Do not pull handbrake lever with brake caliper re-
moved/rear wheel removed!
– Remove silencer assembly
a
....................................................See Group 18
L
Note:
Apply rear brake to loosen the 6-point nut (3).
•
Unscrew 6-point nut (3)
•
Disengage vent hose (1) from clip (2)
•
Use hoist,
BMW No. 00 1 570,
to lift C1 until it is
securely supported with the rear wheel free of
the ground
•
Detach lower end of strut assembly (5) and tie it
up out of the way
•
Detach auxiliary swing arm (1-4) and remove it
C1340011
3
1
2
C1130050
00 1 570
C1340011
2
1
3
5
4

BMW C1 200 Specifications

General

Displacement	176 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Engine Type	Single-cylinder, 4-stroke
Transmission	CVT
Brakes	Disc
Torque	17 Nm at 6, 500 rpm
Dry Weight	139 kg
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	9.5 liters