Figure 8.3: Web Client – Setup
See Configuration, page 35 for a description of options available here.
Alarm
Figure 8.4: Web alarm
Here you can set device alarm type and alarm sound setup.
Always make sure the current device can upload the alarm.
Type
Parameter Function
Alarm Type Video loss System alarm when video loss occurs.
Motion detect System alarm when motion detection alarm occurs.
Disk full System alarm when disk is full.
Disk error System alarms when disk error occurs.
Video masking System alarm when camera is maliciously masked.
8.3.3
118 en | Web Client Software DIVAR AN 3000 / DIVAR AN 5000
2014.10 | 2.0 | AM18-Q0669 Operations Manual Bosch Security Systems