Bosch DIVAR AN 5000 User Manual

General
Figure 6.3: General
Here you can assign the following settings:
System time / GMT
Click on the appropriate number to change it with the numeric keypad popup. The number
format and separator are changed in the fields below. The system is always started in default
24-hour mode. Select the correct GMT time zone. Click <Save> if you make any changes to the
time.
Date format
Choose here between
– YYYYMMDD (year month day) this is the default
– MMDDYYYY
– DDMMYYYY
DST (daylight saving)
Select checkbox to automatically set daylight saving in the DVR internal clock. To set the
Start/End times for daylight saving click <Set> and assign the relevant times as a set ‘Date’ or
as a set ‘Day of the week’.
Date separator
Choose here between . / -
Time format
Choose here between 12- and 24-hour.
6.2
DIVAR AN 3000 / DIVAR AN 5000 Configuration | en 37
Bosch Security Systems Operations Manual 2014.10 | 2.0 | AM18-Q0669

Bosch DIVAR AN 5000 Specifications

General

Motion sensor	Yes
Total storage capacity	2000 GB
Video compression formats	H.264
Analog signal format system	NTSC, PAL
Compatible operating systems	Windows XP, Windows Vista, Windows 7.
Playback resolutions supported	960x576, 960x480, 704x576, 704x480, 704x288, 704x240, 352x288, 352x240, 176x144, 176x120
Audio input	4
BNC input ports	16
USB 2.0 ports quantity	1
Ethernet interface type	Gigabit Ethernet
HDD interface	Serial ATA
Maximum HDD capacity	3000 GB
Power requirements	100-240VAC 50-60Hz
Optical drive included	No
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 93 %

Weight and Dimensions

Dimensions (WxDxH)	440 x 420 x 70 mm