Canon imagePRESS C7000VP Series User Manual

Trouble Shooting Information for C7000VP series
Page 120
Rev. 2.0
2010/09/17
7 Reference
7.1 Table indicating Fixing Temperature Shift
In PRODUCTIVITY PRIORITY modes
MAP for control temperatures in combination of primary and secon
dary fixing assemblies (Dcon Ver.11.xx or later)
64g 80g
106g 129g 151g 181g 210g 257g
～ ～ ～ ～ ～ ～ ～ ～
79g 105g 128ｇ 150g 180g 209g 256g 300g
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
default control temperature Media not supported
○Mode 1 - Prioritize fixing performance on 257-300gsm In case 257-300gsm is set as "Frequently Used Max. Basis Weight"
Higher than that of IMAGE PRIORITY mode Almost the same as that
of IMAGE PRIORITY
mode
Name of PRODUCTIVITY PRIORITY modes
Properties
Surface nature
○Mode 3 Lower - Upper limit is set to 180gsm; thin coated media of 80-105gsm is also covered. In case 180gsm or less is set as "Frequently Used Max. Basis Weight"
○Mode 4
- The same control temperature as that of IMAGE PRIORITY mode
In case 210-256gsm is set as "Frequently Used Max. Basis Weight"
Default mode since Dcon Ver.11.xx
Slightly lower than that of IMAGE PRIORITY mode
Lower
○Mode 2
- Upper limit is set to 256gsm; thin coated media of 106-128gsm is also covered.
In case 181-209gsm is set as "Frequently Used Max. Basis Weight"
Basis weight
Gloss
MAP for control temperatures in combination of primary and secon
dary fixing assemblies (Dcon Ver.11.xx or later)
64g 80g
106g 129g 151g 181g 210g 257g
～ ～ ～ ～ ～ ～ ～ ～
79g 105g 128ｇ 150g 180g 209g 256g 300g
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
default control temperature Media not supported
○Mode 1 - Prioritize fixing performance on 257-300gsm In case 257-300gsm is set as "Frequently Used Max. Basis Weight"
Higher than that of IMAGE PRIORITY mode Almost the same as that
of IMAGE PRIORITY
mode
Name of PRODUCTIVITY PRIORITY modes
Properties
Surface nature
○Mode 3 Lower - Upper limit is set to 180gsm; thin coated media of 80-105gsm is also covered. In case 180gsm or less is set as "Frequently Used Max. Basis Weight"
○Mode 4
- The same control temperature as that of IMAGE PRIORITY mode
In case 210-256gsm is set as "Frequently Used Max. Basis Weight"
Default mode since Dcon Ver.11.xx
Slightly lower than that of IMAGE PRIORITY mode
Lower
○Mode 2
- Upper limit is set to 256gsm; thin coated media of 106-128gsm is also covered.
In case 181-209gsm is set as "Frequently Used Max. Basis Weight"
Basis weight
Gloss
MAP for control temperatures in combination of primary and secon
dary fixing assemblies (Dcon Ver.11.xx or later)
64g 80g
106g 129g 151g 181g 210g 257g
～ ～ ～ ～ ～ ～ ～ ～
79g 105g 128ｇ 150g 180g 209g 256g 300g
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
Plain
One-sided coated
Two-sided coated
Recycled
Embossed
Film/label
Vellum
Cotton
default control temperature Media not supported
○Mode 1 - Prioritize fixing performance on 257-300gsm In case 257-300gsm is set as "Frequently Used Max. Basis Weight"
Higher than that of IMAGE PRIORITY mode Almost the same as that
of IMAGE PRIORITY
mode
Name of PRODUCTIVITY PRIORITY modes
Properties
Surface nature
○Mode 3 Lower - Upper limit is set to 180gsm; thin coated media of 80-105gsm is also covered. In case 180gsm or less is set as "Frequently Used Max. Basis Weight"
○Mode 4
- The same control temperature as that of IMAGE PRIORITY mode
In case 210-256gsm is set as "Frequently Used Max. Basis Weight"
Default mode since Dcon Ver.11.xx
Slightly lower than that of IMAGE PRIORITY mode
Lower
○Mode 2
- Upper limit is set to 256gsm; thin coated media of 106-128gsm is also covered.
In case 181-209gsm is set as "Frequently Used Max. Basis Weight"
Basis weight
Gloss

Canon imagePRESS C7000VP Series Specifications

General

Brand	Canon
Model	imagePRESS C7000VP Series
Category	Printer
Language	English