Handling rolls
Media Detailed Settings Dialog Box (W indows)
The Media Detailed Settings dialog box of fers the following settings. For details on settings items, refer to
the printer driver help.
Note
• T o display the Media Detailed Settings dialog box, on the Main Sheet (Windows) (→P .450) , click
Settings by Media T ype .
Setting Item Description
A Media T ype
Select the paper type.
For information on the types of paper the printer supports, refer to the Paper
Reference Guide . ( → P .108)
B Drying T ime Specify the time that the printer waits for ink to dry , as needed. The Drying
T ime setting is only valid for rolls.
( → P .135)
C Between Pages
Specify the time the printer waits after printing a page until ejecting the
paper , as needed.
D Between Scans Specify the time the printer waits after printing a line on the page until
printing the next line, as needed.
E Roll Paper Margin for
Safety
Y ou can specify the length of a margin on the leading edge of paper to
ensure that paper susceptible to curling is held rmly against the Platen .
F Near End Margin Specify the length of the Near End Margin (the leading edge margin) of the
roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. Y ou can adjust this setting
if paper is not cut well when automatic cutting is used.
H Calibration V alue Y ou can specify whether to apply the results of calibration performed on the
printer to image processing.
I Mirror Specify whether to print a mirror image, as needed. Select this option to print
a version of the document or image with the left and right sides inverted.
Handling Paper 151
To Next Page
Loading...
Need help?
General