Ink T anks
Checking Ink T ank Levels
On the Display Screen , you can check how much ink is left in the Ink T ank .
The Display Screen indicates the remaining ink levels, unless a message is displayed.
During messages, press the Information button to view the ink levels on the Display Screen .
These levels shown on the Display Screen correspond to the inks identied by the Color Label on the bottom
of the Display Screen .
These symbols may be displayed above the ink level: “!” if ink is low , “×” if no ink is left, and “?” if you have
deactivated ink level detection.
The remaining ink level is indicated as shown below .
If the Display Screen indicates to replace the Ink T ank , replace the Ink T ank . If a message is displayed
indicating to check the remaining ink levels, or after tasks that consume a lot of ink such as large-format
printing or head cleaning, check the remaining levels and replace Ink T ank as needed. ( → P .614 )
620 Maintenance
To Next Page
Loading...
Need help?
General