Control Panel
Switching to Menu Mode
Press the Menu button to display the main menu.
Depending on the status, the printer switches to Menu mode as follows.
Printer Status
When the Menu Button is Pressed
Online Switches to Menu mode.
Online, printing The printer stays online. It does not switch to Menu
mode.
Of ine Switches to Menu mode.
Of ine, printing Menus available during printing are displayed.
Of ine, when an error message is displayed Not switch to Menu mode until the problem is solved.
Press the Information button to display the submenus.
Press the Information button to display the Maintenance Cartridge capacity and remaining ink levels, as well
as information on the loaded paper and the printer . Press the Information button repeatedly to change the
information displayed. ( → P .61)
Press any button other than the Information button to restore the previous mode.
After you display a submenu, the printer will revert to the previous mode in about ten seconds if no print
job is received or if you do not operate the printer .
Note
• Y ou can start Head Cleaning A by holding down the Information button for three seconds or more.
( → P .624 )
28 Printer Parts
To Next Page
Loading...
Need help?
General