Important
• The genuine Canon paper settings provided in the printer control panel and printer driver are optimized for genu-
ine Canon paper. If these settings are selected for printing on paper other than genuine Canon paper, the ink may
bleed or the printhead may rub against the paper. In order to easily print on paper other than genuine Canon
paper and feed confirmed paper, we recommend that you select one of the following general-purpose paper set-
tings or special settings.
Note
• For an overview of the media types, see "Types of Paper." ➔P.326
• For details on how to select the media type in the control panel and printer driver, see "Types of Paper." ➔ P.326
Choosing General-Purpose Paper Settings
Since these settings anticipate a wide variety of paper other than genuine Canon paper and feed confirmed paper,
these settings will make it difficult for bleeding ink and the printhead rubbing to occur. Refer to the following table
for the relationships between the conditions of the paper other than genuine Canon paper and feed confirmed pa-
per and the media type to select.
Type Approximate weight Approximate thickness Printer control panel Printer driver
Plain Paper 70 g/m² 0.09 mm (0.0035 in.) Plain Paper Plain Paper
Coated Paper 90 g/m² 0.13 mm (0.0051 in.) LW. Coated Paper Lightweight Coated Paper
170 g/m² 0.22 mm (0.0087 in.) HW. Coated Paper Heavyweight Coated Paper
Photo Paper 180 g/m² 0.18 mm (0.0071 in.) LW. Photo Paper Lightweight Photo Paper
LWPhotoPaper(LI)(*1) Lightweight Photo Paper (LowInk)(*1)
260 g/m² 0.26 mm (0.010 in.) HW. Photo Paper Heavyweight Photo Paper
HWPhotoPaper(LI)(*1) Heavyweight Photo Paper (LowInk)(*1)
Proof 80 g/m² 0.10 mm (0.0039 in.) News Proof (*2)
Sign/CAD Paper 150 g/m² 0.11 mm (0.0043 in.) CAD Clear Film CAD Clear Film
90 g/m² 0.08mm (0.0031 in.) CAD Trce(LowInk) CAD Tracing Paper (Low Ink)
100 g/m² 0.13 mm (0.0051 in.) Syn.Papr(LowInk) Synthetic Paper (LowInk)
*1: Print using slightly less ink. Try this if you are concerned about rubbing of ink after printing.
*2: Software RIP is required separately.
Selecting Special Settings
Special settings are provided that allow you to select the amount of ink used in steps. You can fix lackluster colors
or bleeding ink by selecting special settings where the amount of ink used is suitable for the paper you are using.
"Special 1" uses the least amount of ink, with the amount of ink used increasing through 5 steps as the number
increases up to "Special 5" which uses the greatest amount of ink. Although colors become more vivid as the
amount of ink used increases, bleeding also occurs more easily. We recommend that you try in order starting from
"Special 1" while checking the state of the printing.
Displaying the Paper Reference Guide
Displaying the Paper Reference Guide
The Paper Reference Guide are not included. To view, display the Paper Reference Guide on the website from
the links in the installed software. An Internet connection is required in order to view them.
•
Windows
The basic instructions for displaying the Paper Reference Guide from the printer driver are as follows.
1.
Open the printer driver.
(See "Accessing the Printer Driver Dialog Box from Applications (Windows).") ➔ P.148
(See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows).") ➔ P.149
iPF780
Displaying the Paper Reference Guide
User's Guide
Handling and Use of Paper Paper
329
To Next Page
Loading...
Need help?
General
Weight and Dimensions
