4
In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5
Select the printing application in the E Print Target list.
6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the LPaper Source list.
8
In the APage Size list, click the size of the original as specified in the application. In this case, click ISO
A4 or Letter (8.5"x11").
9
Select the CEnlarged/Reduced Printing check box.
Note
•
If the C Enlarged/Reduced Printing check box is
not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
10
Click EFit Roll Paper Width.
Note
• After you click E Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the
loaded roll in the Roll Paper Width list and click OK.
• Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.145
Resizing Originals to Fit the Roll Width (Mac OS)
Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-
ple.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
iPF780
Resizing Originals to Fit the Roll Width (Mac OS)
User's Guide
Enhanced Printing Options Printing enlargements or reductions
63
To Next Page
Loading...
Need help?
General
Weight and Dimensions
