Canon imagePROGRAF iPF780 User Manual

Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ........................................................................................ 570
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ..................................................................570
GL2: W0502 The parameter is out of range. ...................................................................................................... 570
GL2: W0504 This command is not supported. ...................................................................................................570
This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
The printer has received a HP-GL/2
print job that cannot be printed on the
paper that has been advanced.
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on paper compati-
ble with HP-GL/2, refer to the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔ P.329
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However,
note that this error may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause Corrective Action
The printer memory is
full.
Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printing
results because the image may be incomplete in some cases.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in a HP-GL/2 command is out of the suppor-
ted range.
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause Corrective Action
The printer has received an unsupported HP-GL/2 com-
mand.
Check the print job.
If you have specified ProcessingOption > Warning > On in the
Control Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
iPF780
User's Guide
Error Message Messages regarding HP-GL/2
570

Canon imagePROGRAF iPF780 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Internal memory	256 MB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm