Canon imagePROGRAF iPF780 User Manual

Top cover is open.
Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is
open.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
Prepare for parts replacement.
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for
which service is required.
If "Parts replacement time has passed." is displayed, you can continue to use the
printer for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance.
Unknown file.
Unknown file.
Cause Corrective Action
Data sent to keep the printer up to date (such as pa-
per information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
You have uploaded firmware for a different model. Check the firmware version. Turn off the printer and wait a while before re-
storing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Multi-sensor error
Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shining on
the printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when exposed to direct sunlight
or strong lighting.
The performance of a sensor inside the printer may
be impaired.
Turn off the printer and wait at least three seconds before restoring the pow-
er.
If the message is displayed again, contact your Canon dealer for assistance.
Error in cutter position.
Error in cutter position.
Cause Corrective Action
The Cutter Unit stops in the middle of cutting.
1.
Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
Top cover is open. iPF780
User's Guide
Error Message Other Messages
572

Canon imagePROGRAF iPF780 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Internal memory	256 MB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm