Canon imagePROGRAF iPF780 User Manual

USB
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IEEE 802.3az EEE
Protocols SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)
Ink
For information on the ink the printer supports, see "Ink Tanks."
➔P.492
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.") ➔ P.329
Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔P.326
Minimum paper length Rolls 203.2 mm (8.0 in)
Sheets 279.4 mm (11.0 in)
Maximum printable length (*1) Rolls 18 m (19.7 yd)
Sheets 1,600 mm (63.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets 0.07–0.8 mm (0.0028–0.031 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." ➔P.575
*1: Varies depending on the operating system or application.
Roll Holder Set Roll Holder Set RH2-33
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes the required
margin. (See "Printing on Oversize Paper.") ➔ P.70
Margins of Printable Area Margins of Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)
Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 0/3 mm (0/0.12 in) 20 mm (0.79 in) 5 mm (0.20 in) 5 mm (0.20 in)
iPF780
Print Area
User's Guide
Specications Printer Specications
575

Canon imagePROGRAF iPF780 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Internal memory	256 MB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm