Canon imagePROGRAF iPF780 User Manual

HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the source appli-
cation, is incorrect.
In the Control Panel menu, set PageSizeProcess1 to On.
(See "Menu Settings.") ➔P.414
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created
in the source application, is incorrect.
In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Menu Settings.") ➔P.414
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Cause Corrective Action
Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") ➔P.414
Replotting with HP-GL/2 jobs is not possible.
Replotting with HP-GL/2 jobs is not possible.
Cause Corrective Action
The data was lost because of replot-
ting.
Data for replotting is lost after the following operations. In this case, send the print job again.
• The memory buffer was cleared from the Control Panel.
• The printer was turned off.
• The printer has received a new HP-GL/2 print job.
• Printing has been canceled
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause Corrective Action
The printer is analyzing the print job. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") ➔P.414
HP-GL/2 jobs are printed 6 mm larger than specied
iPF780
User's Guide
Troubleshooting HP-GL/2 problems
548

Canon imagePROGRAF iPF780 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO, HP-GL/2, HP-RTL
Media thickness	0.07 - 0.8 mm
Maximum print size	-
Media width (rolls)	254 - 914.4 mm
Media width (sheets)	203.2 - 914.4 mm
Maximum roll diameter	150 mm
Paper tray media types	Coated paper, Cut sheet, Plain paper, Roll
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet LAN data rates	10/100/1000 Base-T/TX Mbit/s
Ethernet interface type	Gigabit Ethernet
Certification	RoHS
Product color	Black, Grey
Internal memory	256 MB
Sound pressure level (printing)	48 dB
Compliance industry standards	IEEE 802.3ab, IEEE 802.3u, IEEE 802.3
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	877 mm
Width	1304 mm
Height	1062 mm