Removable Hard Disk (Option)
Introduction to the Removable Hard Disk
Introduction
The PRISMAsync controller can be equipped with a removable hard disk. The removable hard
disk is located behind the horizontal cover in front of the control panel.
IMPORTANT
Avoid installing the machine at high altitudes above approximately 3,000 meters above sea
level, or higher.
Machines with a hard disk may not operate properly when used at high altitudes above
approximately 3,000 meters above sea level, or higher.
Illustration
[5] Location of the removable hard disk
Using the Removable Hard Disk
The removable hard disk is intended to prevent the theft of confidential data. After working hours,
for example, the hard disk can be removed from the controller and stored in a safe. The next
working day, the hard disk must be placed back before the printer is turned on.
A lock in front of the removable hard disk prevents unauthorized removal of the hard disk. For
security reasons, only a limited number of people will have a key to the lock.
Each removable hard disk is unique. Always use the same dedicated removable hard disk with a
particular printer.
Removable Hard Disk (Option)
22
Chapter 2 - Explore the print system
Canon varioPRINT DP line
To Next Page
Loading...
Need help?
General
