1-7
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Special Actions for Application Inspections (Inspection Policy Map)
Where to Go Next
Where to Go Next
To use an inspection policy, see Chapter 1, “Configuring a Service Policy Using the Modular Policy
Framework.”
Feature History for Inspection Policy Maps
Table 1-1 lists the release history for this feature.
Table 1-1 Feature History for Service Policies
Feature Name Releases Feature Information
Inspection policy maps 7.2(1) The inspection policy map was introduced. The following
command was introduced: class-map type inspect.
Regular expressions and policy maps 7.2(1) Regular expressions and policy maps were introduced to be
used under inspection policy maps. The following
commands were introduced: class-map type regex, regex,
match regex.
Match any for inspection policy maps 8.0(2) The match any keyword was introduced for use with
inspection policy maps: traffic can match one or more
criteria to match the class map. Formerly, only match all
was available.