1-15
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring IPv6 Neighbor Discovery
Feature History for IPv6 Neighbor Discovery
Related Documents for IPv6 Prefixes
RFCs for IPv6 Prefixes and Documentation
Feature History for IPv6 Neighbor Discovery
Table 1-2 lists each feature change and the platform release in which it was implemented.
Related Topic Document Title
ipv6 commands command reference
RFC Title
RFC 2373 includes complete documentation to show
how IPv6 network address numbers must be shown in
router advertisements. The command argument
ipv6-prefix indicates this network number, in which the
address must be specified in hexadecimal format using
16-bit values between colons.
IP Version 6 Addressing Architecture
RFC 3849 specifies the requirements for using IPv6
address prefixes in documentation. The IPv6 unicast
address prefix that has been reserved for use in
documentation is 2001:DB8::/32.
IPv6 Address Prefix Reserved for Documentation
Table 1-2 Feature History for IPv6 Neighbor Discovery
Feature Name Releases Feature Information
IPv6 Neighbor Discovery 7.0(1) We introduced this feature.
We introduced the following commands: ipv6 nd
ns-interval, ipv6 nd ra-lifetime, ipv6 nd suppress-ra,
ipv6 neighbor, ipv6 nd prefix, ipv6 nd dad-attempts,
ipv6 nd reachable-time, ipv6 address, ipv6
enforce-eui64.
Address Config Flags for IPv6 DHCP Relay 9.0(1) We introduced the following commands: ipv6 nd
managed-config-flag, ipv6 nd other-config-flag.
To Next Page
Loading...
Need help?
General