Cisco ASA 5512-X Cli Configuration Guide

1-21
Cisco ASA Series CLI Configuration Guide
Chapter 1 Setting General VPN Parameters
Viewing Active VPN Sessions
License : AnyConnect Premium
Encryption : AnyConnect-Parent: (1)none SSL-Tunnel: (1)RC4
Hashing : AnyConnect-Parent: (1)none SSL-Tunnel: (1)SHA1
Bytes Tx : 10662 Bytes Rx : 17248
Group Policy : GroupPolicy_SSL_IPv6 Tunnel Group : SSL_IPv6
Login Time : 17:42:42 UTC Mon Oct 22 2012
Duration : 0h:00m:33s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
Viewing Active Clientless SSL VPN Sessions by IP Address Type
To view active clientless SSL VPN sessions using the command line interface, enter the show
vpn-sessiondb webvpn filter ipversion command in privileged EXEC mode.
Examples
Example 1-3 Output from show vpn-sessiondb webvpn filter ipversion [v4 | v6] command
hostname# sh vpn-sessiondb webvpn filter ipversion v4
Session Type: WebVPN
Username : user1 Index : 63
Public IP : 171.16.17.6
Protocol : Clientless
License : AnyConnect Premium
Encryption : Clientless: (1)RC4 Hashing : Clientless: (1)SHA1
Bytes Tx : 62454 Bytes Rx : 13082
Group Policy : SSLv6 Tunnel Group : SSL_IPv6
Login Time : 18:07:48 UTC Mon Oct 22 2012
Duration : 0h:00m:16s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
Viewing Active Lan to Lan VPN Sessions by IP Address Type
To view active clientless SSL VPN sessions using the command line interface, enter the show
vpn-sessiondb l2l filter ipversion command in privileged EXEC mode.
Command Purpose
show vpn-sessiondb webvpn filter ipversion {v4 | v6}
This command shows active clientless SSL VPN
sessions filtered by the endpoint’s public IPv4 or IPv6
address.
The public address is the address assigned to the
endpoint by the enterprise.

Cisco ASA 5512-X Specifications

General

Brand	Cisco
Model	ASA 5512-X
Category	Firewall
Language	English