Cisco ASA 5512-X Cli Configuration Guide

1-14
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring the ASA CSC Module
Troubleshooting the CSC Module
Port Mask: 255.255.224.0
Gateway IP Address: 209.165.200.254
Troubleshooting the CSC Module
This section includes procedures that help you recover or troubleshoot the module and includes the
following topics:
• Installing an Image on the Module, page 1-14
• Resetting the Password, page 1-15
• Reloading or Resetting the Module, page 1-16
• Shutting Down the Module, page 1-17
Note This section covers all ASA module types; follow the steps appropriate for your module.
Installing an Image on the Module
If the module suffers a failure, and the module application image cannot run, you can reinstall a new
image on the module from a TFTP server.
Note Do not use the upgrade command within the module software to install the image.
Prerequisites
Be sure the TFTP server that you specify can transfer files up to 60 MB in size.
Note This process can take approximately 15 minutes to complete, depending on your network and the size
of the image.

Cisco ASA 5512-X Specifications

General

Brand	Cisco
Model	ASA 5512-X
Category	Firewall
Language	English