Cisco Catalyst 3850 series User Manual

CHAPTER 9
Configuring MSDP
•
Finding Feature Information, page 195
•
, page 195
•
Information About Using MSDP to Interconnect Multiple PIM-SM Domains, page 195
•
How to Use MSDP to Interconnect Multiple PIM-SM Domains, page 210
•
Configuration Examples for Using MSDP to Interconnect Multiple PIM-SM Domains, page 235
•
Additional References, page 238
•
Feature History and Information for Multicast Source Discovery Protocol, page 239
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Information About Using MSDP to Interconnect Multiple
PIM-SM Domains
Benefits of Using MSDP to Interconnect Multiple PIM-SM Domains
•
Allows a rendezvous point (RP) to dynamically discover active sources outside of its domain.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 195

Cisco Catalyst 3850 series Specifications

General

Brand	Cisco
Model	Catalyst 3850 series
Category	Switch
Language	English