Cisco Catalyst 3850 series User Manual

CHAPTER 15
IP Multicast Optimization: Multicast Subsecond
Convergence
•
Finding Feature Information, page 339
•
Prerequisites for Multicast Subsecond Convergence, page 339
•
Restrictions for Multicast Subsecond Convergence, page 340
•
Information About Multicast Subsecond Convergence, page 340
•
How to Configure Multicast Subsecond Convergence, page 342
•
Configuration Examples for Multicast Subsecond Convergence, page 346
•
Additional References, page 347
•
Feature History and Information for Multicast Subsecond Convergence, page 348
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Multicast Subsecond Convergence
Service providers must have a multicast-enabled core in order to use the Cisco Multicast Subsecond
Convergence feature.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 339

Cisco Catalyst 3850 series Specifications

General

Brand	Cisco
Model	Catalyst 3850 series
Category	Switch
Language	English