Cisco Catalyst 3850 series User Manual

Table 8: Default IGMP Configuration
Default SettingFeature
No group memberships are defined.Multilayer device as a member of a multicast group
All groups are allowed on an interface.Access to multicast groups
Version 2 on all interfaces.IGMP version
60 seconds on all interfaces.IGMP host-query message interval
60 seconds on all interfaces.IGMP query timeout
10 seconds on all interfaces.IGMP maximum query response time
Disabled.Multilayer device as a statically connected member
Default IGMP Snooping Configuration
This table displays the default IGMP snooping configuration for the device.
Table 9: Default IGMP Snooping Configuration
Default SettingFeature
Enabled globally and per VLANIGMP snooping
None configuredMulticast routers
DisabledIGMP snooping Immediate Leave
None configuredStatic groups
2TCN
1
flood query count
DisabledTCN query solicitation
DisabledIGMP snooping querier
EnabledIGMP report suppression
1
(1) TCN = Topology Change Notification
Default IGMP Filtering and Throttling Configuration
This table displays the default IGMP filtering and throttling configuration for the device.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
44 OL-32598-01
Configuring IGMP
Default IGMP Configuration

Cisco Catalyst 3850 series Specifications

General

Brand	Cisco
Model	Catalyst 3850 series
Category	Switch
Language	English