PurposeCommand or Action
(Optional) Sets the service instance to match.
match service-instance { LINE }
Step 5
Example:
Device(config-mdns-sd-sl)##
This command configures the parameters for the service list name that is created
in step 2.
You cannot use the match command if you have used the query option
in the previous step. The match command can be used only for the
permit or deny option.
Note
match service-instance servInst
1
(Optional) Sets the value of the mDNS service type string to match.
match service-type {LINE }
Step 6
Example:
Device(config-mdns-sd-sl)# match
This command configures the parameters for the service list name that is created
in step 2.
You cannot use the match command if you have used the query option
in the previous step. The match command can be used only for the
permit or deny option.
Note
service-type _ipp._tcp
Returns to privileged EXEC mode.end
Example:
Device(config-mdns-sd-sl)# end
Step 7
What to Do Next
Proceed to enable the mDNS gateway and redistribution of services.
Related Topics
Service Discovery Gateway , on page 311
Filtering, on page 312
Example: Creating a Service-List, Applying a Filter and Configuring Parameters, on page 322
Configuring the Service List (GUI)
Step 1
Choose Configuration > Controller > mDNS > Static Service.
Step 2
Click Create Service.
The Service List > Create Service page is displayed.
Step 3
In the Service List Name text box, enter the service list name.
Step 4
From the Service rule drop-down list, choose from the following options:
• permit—permits the service list.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 315
Configuring the Service Discovery Gateway
Configuring the Service List (GUI)
To Next Page
Loading...
Need help?
General