Cisco Catalyst 3850 series User Manual

PurposeCommand or Action
Verifies your entries.
show ip igmp interface [interface-id]
Example:
Device# show ip igmp interface
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 7
startup-config
Related Topics
Joining a Multicast Group, on page 39
Example: Configuring the Device as a Member of a Multicast Group, on page 93
IGMP Multicast Addresses, on page 34
Example: Configuring the Device as a Member of a Multicast Group, on page 93
Controlling Access to IP Multicast Group (CLI)
The device sends IGMP host-query messages to find which multicast groups have members on attached local
networks. The device then forwards to these group members all packets addressed to the multicast group.
You can place a filter on each interface to restrict the multicast groups that hosts on the subnet serviced by
the interface can join.
To limit the number of joins on the interface, configure the port for the filter which associates with the IGMP
profile.
This procedure is optional.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
OL-32598-01 47
Configuring IGMP
Controlling Access to IP Multicast Group (CLI)

Cisco Catalyst 3850 series Specifications

General

Brand	Cisco
Model	Catalyst 3850 series
Category	Switch
Language	English