PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 6
Verifies your entries.show running-config
Example:
Device# show running-config
Step 7
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Device# copy running-config
Step 8
startup-config
Related Topics
Multicast Boundaries, on page 131
Example: Defining the IP Multicast Boundary to Deny Auto-RP Information, on page 183
IP Multicast Boundary, on page 24
Multicast Group Transmission Scheme, on page 22
Example: Configuring an IP Multicast Boundary, on page 305
Configuring sdr Listener Support
Enabling sdr Listener Support (CLI)
By default, the device does not listen to session directory advertisements.
This procedure is optional.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface interface-id
4.
ip sap listen
5.
end
6.
show running-config
7.
copy running-config startup-config
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
298 OL-32598-01
Configuring Basic IP Multicast Routing
Configuring Optional IP Multicast Routing Features
To Next Page
Loading...
Need help?
General