Cisco CRS User Manual

description (IPSec profile)
To create a description of an IPSec profile, use the description command in profile configuration mode. To
delete a profile description, use the no form of this command.
description string
no description
Syntax Description
Character string describing the IPSec profile.
string
Command Default
None
Command Modes
Crypto IPSec profile
Command History
ModificationRelease
This command was introduced.Release 2.0
Usage Guidelines
Use the description command inside the profile configuration submode to create a description for an IPSec
profile.
Task ID
OperationsTask ID
read, writeprofile configuration
Examples
The following example shows the creation of a profile description:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ipsec profile newprofile
RP/0/RP0/CPU0:router(config-newprofile)# description this is a sample profile
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
132 OL-24740-01
IPSec Commands
description (IPSec profile)

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English