Cisco CRS User Manual

control-plane
To enter the control plane configuration mode, use the control-plane command. To disable all the
configurations under control plane mode, use the no form of this command.
control-plane
no control-plane
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration mode
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
Use the control-plane command to enter control plane configuration mode.
Task ID
OperationsTask ID
read, writesystem
Examples
The following example shows how to enter control plane configuration mode using the control-plane
command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# control-plane
RP/0/RP0/CPU0:router(config-ctrl)#
Related Commands
DescriptionCommand
Configures management plane protection to allow
and disallow protocols.
management-plane, on page 174
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 169
Management Plane Protection Commands
control-plane

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English