Cisco CRS User Manual

show sam sysinfo
To display current configuration settings for the Software Authentication Manager (SAM), use the show sam
sysinfo command.
show sam sysinfo
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 2.0
Usage Guidelines
Use the show sam sysinfo command to determine the configuration settings of the SAM.
The display shows the status of the SAM, current prompt interval setting, and current prompt default response.
Task ID
OperationsTask ID
readcrypto
Examples
The following sample output is from the show sam sysinfo command:
RP/0/RP0/CPU0:router# show sam sysinfo
Software Authentication Manager System Information
==============================================
Status : running
Prompt Interval : 10 sec
Prompt Default Response : NO
This table describes the significant fields shown in the display.
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 253
Software Authentication Manager Commands
show sam sysinfo

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English