Cisco CRS User Manual

sftp-username (trustpoint)
To secure the FTP username, use the sftp-username command in trustpoint configuration mode. To disable
this feature, use the no form of this command.
sftp-username username
no sftp-username username
Syntax Description
Name of the user.
username
Command Default
None
Command Modes
Trustpoint configuration
Command History
ModificationRelease
This command was introduced.Release 3.6.0
Usage Guidelines
The sftp-username command is used only if the URL has (sftp://) in the prefix. If (sftp://) is not specified in
the prefix, the manual certificate enrollment using SFTP fails.
Task ID
OperationsTask ID
read, writecrypto
Examples
The following example shows how to secure the FTP username:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ca trustpoint msiox
RP/0/RP0/CPU0:router(config-trustp)# sftp-username tmordeko
Related Commands
DescriptionCommand
Configures a trusted point with a selected name.crypto ca trustpoint, on page 194
Secures the FTP password.sftp-password (trustpoint), on page 220
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
222 OL-24740-01
Public Key Infrastructure Commands
sftp-username (trustpoint)

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English