Cisco CRS User Manual

show ssl
To display active Secure Socket Layer (SSL) sessions, use the show ssl command.
show ssl [ process-id ]
Syntax Description
(Optional) Process ID (PID) of the SSL application. The range is from
1 to 1000000000.
process-id
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 2.0
Usage Guidelines
To display a specific process, enter the process ID number. To get a specific process ID number, enter run
pidin from the command line or from a shell.
The absence of any argument produces a display that shows all processes that are running SSL.
Task ID
OperationsTask ID
readcrypto
Examples
The following sample output is from the show ssl command:
RP/0/RP0/CPU0:router# show ssl
PID Method Type Peer Port Cipher-Suite
============================================================================
1261711 sslv3 Server 172.16.0.5 1296 DES-CBC3-SHA
This table describes the fields shown in the display.
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
288 OL-24740-01
Secure Socket Layer Protocol Commands
show ssl

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English