Cisco CRS User Manual

description (trustpoint)
To create a description of a trustpoint, use the description command in trustpoint configuration mode. To
delete a trustpoint description, use the no form of this command.
description string
no description
Syntax Description
Character string describing the trustpoint.
string
Command Default
The default description is blank.
Command Modes
Trustpoint configuration
Command History
ModificationRelease
This command was introduced.Release 2.0
Usage Guidelines
Use the description command in the trustpoint configuration mode to create a description for a trustpoint.
Task ID
OperationsTask ID
read, writecrypto
Examples
The following example shows how to create a trustpoint description:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ca trustpoint myca
RP/0/RP0/CPU0:router(config-trustp)# description this is the primary trustpoint
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 205
Public Key Infrastructure Commands
description (trustpoint)

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English