Cisco CRS User Manual

interface tunnel-ip (GRE)
To configure a tunnel interface for generic routing encapsulation (GRE), use the interface tunnel-ip command
in global configuration mode. To delete the IP tunnel interface, use the no form of this command.
interface tunnel-ip number
no interface tunnel-ip number
Syntax Description
Instance number of the interface. The range is from 0 to 65535.
number
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
Task ID
OperationsTask ID
read, writeinterface
Examples
The following example shows how to use the interface tunnel-ip command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface tunnel-ip 50000
RP/0/RP0/CPU0:router(config-if)#
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 133
IPSec Commands
interface tunnel-ip (GRE)

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English