Cisco CRS User Manual

accept-lifetime
To set the time period during which the authentication key on a keychain is received as valid, use the
accept-lifetime command in key configuration mode. To revert to the default value, use the no form of this
command.
accept-lifetime start-time [duration duration value| infinite| end-time]
no accept-lifetime start-time [duration duration value| infinite| end-time]
Syntax Description
Start time, in hh:mm:ss day month year format, in which the key becomes valid.
The range is from 0:0:0 to 23:59:59.
The range for the number of days of the month is from 1 to 31.
The range for the years is from 1993 to 2035.
start-time
(Optional) Determines the lifetime of the key in seconds. The range is from
1-2147483646.
duration duration value
(Optional) Specifies that the key never expires after it becomes valid.infinite
(Optional) Time, in hh:mm:ss day month year format, after which the key expires.
The range is from 0:0:0 to 23:59:59.
end-time
Command Default
None
Command Modes
Key configuration
Command History
ModificationRelease
This command was introduced.Release 3.3.0
The range values were added for the start-time argument.
Release 3.6.0
Usage Guidelines
Task ID
OperationsTask ID
read, writesystem
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
146 OL-24740-01
Keychain Management Commands
accept-lifetime

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English