Cisco CRS User Manual

show radius authentication
To obtain information and detailed statistics for the RADIUS authentication server and port, use the show
radius authentication command.
show radius authentication
Syntax Description
This command has no keywords or arguments.
Command Default
If no RADIUS servers are configured on the router, the output is empty. If the default values are for the counter
(for example, request and pending), the values are all zero because the RADIUS server was just defined and
not used yet.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.3.0
Usage Guidelines
Task ID
OperationsTask ID
readaaa
Examples
The following sample output is for the show radius authentication command:
RP/0/RP0/CPU0:router# show radius authentication
Server: 12.26.25.61, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.26.49.12, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.38.28.18, port: 21099
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
80 OL-24740-01
Authentication, Authorization, and Accounting Commands
show radius authentication

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English