Cisco CRS User Manual

enrollment terminal
To specify manual cut-and-paste certificate enrollment, use the enrollment terminal command in trustpoint
configuration mode. To delete a current enrollment request, use the no form of this command.
enrollment terminal
no enrollment terminal
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Trustpoint configuration
Command History
ModificationRelease
This command was introduced.Release 3.4.0
Usage Guidelines
You can manually cut and paste certificate requests and certificates when you do not have a network connection
between the router and certification authority (CA). When the enrollment terminal command is enabled, the
router displays the certificate request on the console terminal, which allows you to enter the issued certificate
on the terminal.
Task ID
OperationsTask ID
read, writecrypto
Examples
The following example shows how to manually specify certificate enrollment through cut-and-paste. In this
example, the CA trustpoint is myca.
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ca trustpoint myca
RP/0/RP0/CPU0:router(config-trustp)# enrollment terminal
Related Commands
DescriptionCommand
Configures a trusted point with a selected name.crypto ca trustpoint, on page 194
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
210 OL-24740-01
Public Key Infrastructure Commands
enrollment terminal

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English