Cisco CRS User Manual

management-plane
To configure management plane protection to allow and disallow protocols, use the management-plane
command in control plane configuration mode. To disable all configurations under management-plane mode,
use the no form of this command.
management-plane
no management-plane
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Control plane configuration
Command History
ModificationRelease
This command was introduced.Release 3.5.0
Usage Guidelines
Use the management-plane command to enter the management plane protection configuration mode.
Task ID
OperationsTask ID
read, writesystem
Examples
The following example shows how to enter management plane protection configuration mode using the
management-plane command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# control-plane
RP/0/RP0/CPU0:router(config-ctrl)# management-plane
RP/0/RP0/CPU0:router(config-mpp)#
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
174 OL-24740-01
Management Plane Protection Commands
management-plane

Cisco CRS Specifications

General

Brand	Cisco
Model	CRS
Category	Network Router
Language	English