CHAPTER
3-1
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
3
Configuring the Telephony Settings on
the VG248
The telephony settings on the VG248 determine the functionality of the analog
phones connected to it. However, before configuring these settings, ensure that
you have completed the basic network configuration described in Chapter 2,
“Getting Started with the VG248.”
After verifying connectivity to the network, review these sections to customize
the telephony settings:
• Identifying the Cisco CallManager TFTP Server, page 3-2
• Changing the Cisco CallManager Device Name, page 3-2
• Disabling Cisco Fax Relay, page 3-3
• Reverting to Previous Configuration, page 3-3
• Choosing the Call Control Mode, page 3-4
• Assigning Feature Codes, page 3-4
• Identifying the Country Code for VG248, page 3-6
• Changing the Hook Flash Timer for Analog Phones, page 3-7
• Setting the Port Enable Policy, page 3-7
• Configuring Port Parameters, page 3-9
To Next Page
Loading...
Need help?
General