Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI
Choosing a Configuration Option
5-6
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Figure 5-1 Basic Configuration of VG248 SMDI Integration
Chained Configuration
Each VG248 system enables you to use up to 48 ports for voice mail access. If
you need more than 48 ports, you can use the chained configuration. The chained
configuration (see Figure 5-2) enables you to connect multiple VG248 devices
together, expanding the number of voice ports available for your voice mail
integration.The SMDI information is shared and passed between the VG248
devices via the Async ports.
Configuration Tips
When using multiple VG248 systems, refer to these tips. Note, however, that this
is not a complete list of the items you must configure; these are tips specific to the
chained configuration. Refer to the “Configuring SMDI Settings on the VG248”
section on page 5-19 for a description of all SMDI configuration tasks.
M
M
IP IP
IP
Legacy
voice mail
Analog
SMDI
68461
Cisco CallManager
To Next Page
Loading...
Need help?
General