INTERIOR TRIM 9G–9
DAEWOO M-150 BL2
D109E551
REAR DOOR EXTERIOR GARNISH
MOLDING
Removal Procedure
1. Pry off the interior garnish molding. Refer to “Rear
Door Interior Garnish Molding” in this section.
2. Pry off the exterior garnish molding.
D Remove the screw (1).
D Pry off exterior garnish molding (2).
D109E552
Installation Procedure
1. Install the exterior garnish molding with the screw.
2. Install the interior garnish molding. Refer to “Rear
Door Interior Garnish Molding” in this section.
D19E553A
TAILGATE TRIM PANEL
Removal Procedure
1. Open the tailgate.
2. Remove the trim from the tailgate.
D Remove the clips by pushing the center of the clip
(1).
D Remove the trim (2).
D19E554A
Installation Procedure
1. Install the trim to the tailgate.
Notice: In case of the loose clips, replace the clips with
the new ones.