8A –8 SEAT BELTS
DAEWOO M-150 BL2
D1AA505B
4. Install the bolt on the lower B–pillar.
D Install the bolt.
Tighten
Tighten the lower B–pillar bolt to 30–45 NSm (22–33
lb-ft).
D Install the spacers and the fiber washer.
D Install the plastic protector on the seat belt anchor.
5. Relocate the seatback.
D11A506A
FRONT SEAT BELT BUCKLE
Removal Procedure
1. Remove the front seat belt buckle
D Remove the bolt (1).
D Remove the buckle (2).
D Remove the patch (3).
D Before removing the driver seat belt buckle, dis-
connect the reminder light connector.
D1AA507B
Installation Procedure
1. Install the front seat belt buckle.
D Connect the reminder light connector.
D Install the patch.
D Install the buckle.
D Install the bolt.
Tighten
Tighten the seat belt buckle bolt to 30–45 NSm
(22–33 lb-ft).
D109E566
THREE–POINT ELR REAR
OUTBOARD SEAT BELT
Removal Procedure
1. Remove the rear seat cushion and the rear seatback.
2. Pry off the rear interior trim panel. Refer to Section
9G, Interior Trim.
D Pry off the backshelf trim panel.
D Pry off the luggage compartment side load trim
panel.