FIVE-SPEED MANUAL TRANSAXLE 5B–21
DAEWOO M-150 BL2
D103B501
GEAR SHIFT CONTROL CABLE
Removal Procedure
1. Remove the air hose (air cleaner to throttle body).
Refer to Section 1B, SOHC Engine Mechanical.
2. Remove the battery.
3. Disconnect the transaxle side select and shift control
cable.
D Remove the cable pins (1).
D Remove the washers (2).
D Disconnect the select and shift control cable (3).
D Remove the cable E–rings (4).
D Disconnect the cables from the cable bracket.
D19E573A
4. Remove the floor console. Refer to Section 9G, Inte-
rior Trim.
D Put aside the floor carpet in order to get the gear
shift cable shown.
D13B5381
5. Disconnect the gear shift lever side select and shift
control cable.
D Remove the select control cable clip (1).
D Ply off the eye ring (2).
D Remove the select control cable E–ring (3).
D Disconnect the select control cable (4).
D Remove the shift control cable pin (5).
D Remove the shift control cable E–ring (6).
D Ply off the shift control cable (7).
D13B539A
6. Remove the select and shift control cable.
D Remove the nuts (1).
D Pull the cables out in the passenger room.