9M –4 EXTERIOR TRIM
DAEWOO M-150 BL2
D19E589A
3. Remove the rear spoiler from the tailgate.
D Remove the nuts (1).
D Remove the rear spoiler (2).
D19E590A
Installation Procedure
1. Install the rear spoiler on the tailgate with the nuts.
2. Install the spoiler seals.
D209B109
FRONT BUMPER SPACER
Removal Procedure
1. Support the hood suitably.
2. Disconnect the negative battery cable.
3. Remove the front bumper spacer.
D Remove the bolts (1).
D Remove the front bumper spacer from the bumper
fascia (2).
4. Remove the turn signal lamps. Refer to Section 9B,
Lighting Systems.
D209B110
Installation Procedure
1. Install the turn signal lamps. Refer to Section 9B,
Lighting Systems.
2. Install the front bumper spacer with the bolts.
3. Connect the negative battery cable.