BODY FRONT END 9R–7
DAEWOO M-150 BL2
D109C531
3. Remove the hood prop rod from the hood prop.
a. Hood prop rod.
D109C532
Installation Procedure
1. Install the hood prop rod to the hood prop.
2. Install the hood prop to the hood with the pins.
D109C533
HOOD LATCH
Removal Procedure
1. Open the hood.
2. Remove the hood latch.
D Remove the screws (1).
D Disconnect the hood latch release cable (2).
D Remove the hood latch (3).
D109C534
Installation Procedure
1. Connect the hood latch release cable to the latch.
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fasteners to prevent premature corrosion.
2. Install the hood latch with the screws.
To Next Page
Loading...
Need help?
General
