Daewoo MATIZ User Manual

9E –16 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
4. Connect the electrical wiring harness.
5. Connect the blow motor resistance connector.
6. Connect the blow motor connector.
7. Connect the thermostat connector.
8. Connect the brake switch connector.
9. Bind the electrical wiring harness strip.
10. Install the steering column with the nuts.
11. Install the defroster duct hose with the screws.
12. Install the instrument panel assembly. Refer to “In-
strument Panel” in this section.
13. Connect the negative battery cable.
D109B516
INSTRUMENT CLUSTER TRIM PANEL
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Remove the instrument cluster trim panel from the in-
strument panel.
D Remove the screws (1).
D Using a flathead screwdriver, remove the central
console cover (2).
Notice: To prevent the instrument panel damage, cover
the flathead screwdriver with a soft cloth.
D109B527
Installation Procedure
1. Install the instrument cluster trim panel with the
screws.
D109B701
INSTRUMENT TRIM PANEL
ASSEMBLY
(Left–Hand Drive Shown, Right–Hand
Drive Similar)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument panel assembly. Refer to “In-
strument Panel” in this section.
3. Remove the instrument cluster brackets from the in-
strument panel.
D Remove the screws.
D Remove the instrument cluster brackets (1).

Daewoo MATIZ Specifications

General

Brand	Daewoo
Model	MATIZ
Category	Automobile
Language	English