GLASS AND MIRRORS 9L–5
DAEWOO M-150 BL2
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
D19E501
WINDSHIELD
Tool Required
J–24402 Glass Sealant Remover
Removal Procedure
1. Remove the cowl vent grille. Refer to Section 9R,
Body Front End.
2. Remove the inside rearview mirror. Refer to “Inside
Rearview Mirror” in this section.
3. Remove the weatherstrip around the windshield.
D19E502
4. Using the glass sealant remover J–24402, cut the
adhesive around the windshield.
D19E503
5. Remove the windshield from the vehicle.
6. Using a knife, remove the adhesive from the wind-
shield.
To Next Page
Loading...
Need help?
General
