Daewoo MATIZ User Manual

1F–312 ENGINE CONTROLS
DAEWOO M-150 BL2
D102F539
4. Disconnect the coolant hoses and vacuum hoses
from the throttle body.
D Loosen the clamps from the coolant hoses (1).
D Disconnect the coolant hoses from the throttle
body (2).
D Disconnect the vacuum hoses (3).
D102F541
5. Remove the throttle body from the intake manifold.
D Remove the throttle body bolts (1).
D Remove the throttle body (2).
D Discard the throttle body gasket (3).
D Inspect the throttle body gasket for the deforma-
tion and the damages.
9–12 NSm
D12F542A
Installation Procedure
1. Install in the reverse order of removal.
Important: Make sure the throttle control cable do not
hold the throttle open. With the engine OFF, check to
see that the accelerator pedal is free.
2. Install the throttle body with the bolts.
Tighten
Tighten the throttle body bolts to 9–12 NSm (80–106
lb-in).
D12F543A
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR
Removal Procedure
1. Remove the engine coolant temperature (ECT) sen-
sor. Refer to Section 1D, Engine Coolings.

Daewoo MATIZ Specifications

General

Brand	Daewoo
Model	MATIZ
Category	Automobile
Language	English