Datalogic PowerScan PD9130 User Manual

Enter/Exit Programming Mode
Product Reference Guide 259
Configure Custom Label String for Arrow Up Key (4-key
models only)
Associate a pre-defined string to the Arrow Up key
Configure Custom Label String for Arrow Up Key
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left.
Define the label string by further scanning 4
digits from the Alphanumeric characters in
Appen-
dix D, Keypad .
The digits must be the hexadecimal ASCII representation
o
f the desired characters; if less than the expected string
of 16 characters are selected, scan the ENTER/EXIT bar
code to terminate the string.
End by scanning the ENTER/EXIT bar code twice.
Make a mistake? Scan the CANCEL bar code to
abort
and not save the entry string. You can
then start again at the beginning.
CANCEL
Configure Custom Label String for Arrow Down Key (4-key
models only)
Associate a pre-defined string to the Arrow Up key
Configure Custom Label String for Arrow Down Key
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
le
ft.
Define the label string by further scanning 4
digits from the Alphanumeric characters in
Appen-
dix D, Keypad
.
The digits must be the hexadecimal ASCII representation
of t
he desired characters; if less than the expected string
of 16 characters are selected, scan the ENTER/EXIT bar
code to terminate the string.
End by scanning the ENTER/EXIT
bar code twice.
Make a mistake? Scan the CANCEL bar code to
abort
and not save the entry string. You can
then start again at the beginning.
CANCEL

Datalogic PowerScan PD9130 Specifications

General

Brand	Datalogic
Model	PowerScan PD9130
Category	Barcode Reader
Language	English